Tahion - Hybrid Drone/Sled 1750 cpu
Hi, this is my 1750 cpu version of my drone/sled Tahion !
I've improved it, it needed it !
Now the top and bottoms shields are not mounted on the same cubes.
The 2 top and bottom T10 thrusters are not mounted on the same cube anymore too and they are hold by separated rods.
8 Puma thrusters remplaces the 4 old T10 version ones, it results a better acceleration. The back of the bot is more protected by cubes.
Hidden behind these cubes there are 6 Puma thrusters + 2 leopards for a nice breaks and backward movement.
I've added 2 more Puma thrusters for the yaw and added more Lynx and panthers for the pitch and front yaw.
At the bottom rear, there are 2 slopes each sides. They doesn't seems at their place but it is. I added them to compensate the lack of drag at the bottom side of the bot due to the rudder whole (Sled did it on my old Tahion). If you remove theses slopes the bot nose will go up when moving and rudder bug will appears easier.
If a rudder bug appears in turns (and there are rare), it just makes the bot turns quicker without slides on side, that's not very boring and can be usefull sometimes.
It can slide on ground and walls, upside down etc... It can do some aerobatics, like looping, playing with balance etc...